Finishing an apartment from the plastering stage is one of the most important steps in preparing a property for occupancy.
It requires completing several stages in the correct order to ensure high-quality results and avoid mistakes and additional expenses.
If you are looking for the steps to finish an apartment from the plastering stage, this guide explains the different finishing stages, starting with electrical and plumbing installations and waterproofing,
followed by flooring and painting, and ending with furniture installation and final handover. It also covers essential tips for choosing suitable materials and setting your budget.
What Does Finishing an Apartment from the Plastering Stage Mean?
Finishing an apartment from the plastering stage means preparing a residential unit where the main construction work has been completed and the walls have been covered with a cement plaster layer, but the final finishing work has not yet been completed.
This stage includes electrical and plumbing installations, waterproofing, flooring and tiling, painting, doors, sanitary fixtures, and lighting.
The finishing requirements vary depending on the apartment's size, the quality of materials, and the desired design, with the ultimate goal of making the unit ready for occupancy and furnishing.
What Are the Steps to Finish an Apartment from the Plastering Stage in Order?
Finishing an apartment from the plastering stage requires completing several steps in an organized sequence. Essential installations should be completed before starting the final finishing work to avoid rework and additional costs.
The finishing stages in the correct order include:
1. Apartment Inspection: Determine the apartment's size and assess the condition of its walls and floors. Prepare a finishing plan and establish the budget.
2. Electrical Installations: Determine the locations of switches, power outlets, and
lighting fixtures, then install the electrical wiring and connections.
3. Plumbing and Drainage Installations: Install water supply and drainage pipes and prepare connection points for bathroom fixtures and kitchen appliances.
4. Door Frame Installation: Prepare door openings and install door frames according to the required measurements.
5. Waterproofing: Apply waterproofing materials to bathroom and kitchen floors and other areas exposed to water to protect against leaks.
6. Plaster Surface Preparation: Check that walls and surfaces are level and repair any cracks or defects before proceeding with the remaining finishing work.
7. Flooring and Tiling: Install flooring in the rooms and tiles in bathrooms and kitchens, or use porcelain tiles according to the selected design.
8. Door and Window Installation: Install interior and exterior doors and windows and ensure they close properly.
9. Gypsum Board Work: Prepare suspended ceilings and decorative gypsum features and determine the locations of concealed lighting.
10. Putty and Painting: Prepare and sand the walls before applying primer and the final paint coats.
11. Installing Sanitary and Electrical Fixtures: Install sinks, faucets, toilets, electrical switches, and lighting fixtures.
12. Kitchen and Storage Units: Install kitchen cabinets, wardrobes, and storage units and ensure they align with the existing connections.
13. Apartment Furnishing: Move in the furniture and install bedroom sets, living room furniture, dining tables, curtains, and accessories.
14. Final Inspection and Handover: Inspect the electrical and plumbing systems and finishing work, address any remaining issues, and clean the apartment to make it
ready for occupancy.
It is best to follow the correct sequence of initial installations and final finishing work. Electrical, plumbing, and waterproofing tests should be completed before closing
installations or covering floors to ensure quality and avoid repair costs later.
What Are the Best Materials to Use When Finishing an Apartment from the Plastering Stage?
Choosing the best materials for finishing an apartment from the plastering stage depends on your budget, the desired finishing level, and how well the materials can withstand everyday use.
It is best to select materials that combine quality, durability, and ease of maintenance, while paying particular attention to the materials used in essential installations, as they directly affect the lifespan of the finishing work.
Some of the most recommended materials include:
1. Electrical Materials: Certified copper wires, durable electrical conduits, and switches and power outlets from reliable brands to ensure safety and efficient operation.
2. Plumbing Materials: High-quality water supply and drainage pipes that resist
corrosion and pressure, along with durable faucets and sanitary fixtures.
3. Waterproofing Materials: Suitable waterproofing products for bathrooms and
kitchens, with waterproofing tests completed before installing tiles.
4. Flooring Materials: Porcelain and ceramic tiles for rooms, bathrooms, and kitchens. Suitable parquet flooring can also be used in interior spaces depending on their
intended use.
5. Paint Materials: High-quality wall putty, primers, and paints that are easy to clean and can withstand everyday use.
6. Ceiling and Decorative Materials: Moisture-resistant gypsum board where
appropriate, supported by strong metal framing.
7. Doors and Windows: Treated wood that resists moisture for doors, and well-insulated aluminum or UPVC window frames.
8. Kitchen Materials: Wood or engineered boards treated to resist moisture and heat, combined with durable fittings and hinges designed for frequent use.
It is important not to choose materials based on price alone. Compare specifications, warranties, and maintenance costs, and consult a specialist to ensure each material is suitable for its intended application.
How Much Does It Cost to Finish an Apartment from the Plastering Stage in Egypt?
The cost of finishing an apartment from the plastering stage in Egypt varies depending on the unit's size, finishing level, material quality, and labor costs.
According to average prices published in the Egyptian market during 2026, the cost of economical finishing ranges from approximately EGP 3,500 to EGP 4,500 per square meter. Mid-range finishing averages around EGP 4,300 to EGP 5,000 per square meter, while luxury finishing may range from EGP 5,500 to EGP 7,000 or more, depending on the design and selected materials.
Accordingly, finishing a 100-square-meter apartment may cost between EGP 350,000 and EGP 500,000 for economical and mid-range finishing.
The cost may exceed EGP 700,000 when choosing higher-end finishes.
These estimated costs include electrical and plumbing work, flooring, painting, doors, and basic finishing.
However, kitchen cabinets, furniture, appliances, and air conditioning units may be
calculated separately.

How Long Does It Take to Finish an Apartment from the Plastering Stage?
The time required to finish an apartment from the plastering stage varies depending on the unit's size, finishing level, number of workers, availability of materials, and construction progress.
In general, finishing an apartment measuring between 100 and 150 square meters may take approximately two to four months for mid-range finishing.
Luxury finishing or designs involving complex details and decorative elements may require four to six months.
This period includes electrical and plumbing installations, waterproofing, flooring, doors, painting, sanitary fixtures, and lighting.
The project duration can be reduced by preparing a clear work schedule, coordinating the different stages between technicians, and securing materials before work begins.
It is also important to allocate sufficient time for testing installations and inspecting the quality of the work before handover.
What Is the Difference Between Finishing an Apartment at the Plastering Stage and an Apartment at the Red Brick Stage?
The main difference between an apartment at the plastering stage and one at the red brick stage is the level of construction completed before the finishing work begins.
An apartment at the plastering stage already has walls covered with cement plaster, while an apartment at the red brick stage is at an earlier construction stage and requires plastering before the remaining finishing work can begin.
The following table highlights the main differences:
Comparison | Apartment at the Plastering Stage | Apartment at the Red Brick Stage |
|---|---|---|
Wall Condition | Covered with cement plaster | Exposed red brick without plaster |
Wall Preparation | Requires surface treatment and leveling when necessary | Requires complete plastering work |
Electrical Work | Installation and completion of wiring depending on the unit's condition | Chasing, conduit installation, and electrical preparation |
Plumbing Work | Plumbing connections installed according to the unit's condition | Initial plumbing installations and pipe extensions required |
Finishing Cost | Relatively lower | Higher due to the additional cost of plastering |
Project Duration | Relatively shorter | Longer because of the additional work stages |
Finishing Stages | Starts with inspecting existing installations and preparing walls | Starts with plastering and initial installations depending on the unit's condition |
Required Budget | More predictable when receiving the apartment | Requires an additional budget for plastering work |
In general, an apartment at the plastering stage is closer to the final finishing stage, helping reduce time and costs compared with an apartment at the red brick stage.
However, the right choice depends on the condition of the existing installations, the quality of the plastering work, the available budget, and the desired finishing level.
How Do You Choose the Right Company to Finish Your Apartment from the Plastering Stage?
Choosing the right company to finish your apartment from the plastering stage is essential for ensuring quality workmanship and compliance with your budget and project schedule. You should not rely solely on the lowest price. Instead, evaluate the company's experience, previous projects, workmanship, and range of services before signing an agreement. When choosing a finishing company, consider the following points:
1. Review Previous Projects: Check photos and actual projects completed by the
company. If possible, visit some finished units to assess the quality of the work.
2. Check Experience: Choose a company with experience finishing apartments of
different sizes and finishing levels, and one that can handle both design and
execution requirements.
3. Compare Price Quotations: Request a detailed quotation outlining the cost of each stage, materials, and labor instead of relying on an unclear overall price.
4. Check Material Quality: Verify the types of electrical, plumbing, waterproofing,
flooring, and painting materials and review their specifications before work begins.
5. Ensure Contract Clarity: Agree on execution stages, total costs, payment schedules, project duration, warranty terms, and procedures for addressing finishing defects.
6. Look for Engineering Supervision: Make sure an engineer or site supervisor is
available to monitor the work and ensure that each stage meets the agreed
specifications.
7. Check Design and Furnishing Services: If you want the apartment to be fully
equipped, consider choosing a company that offers interior design, finishing, and
furnishing as an integrated service.
8. Review Previous Customer Feedback: Check customer reviews and experiences to assess the company's commitment to deadlines, workmanship, and post-handover
support.
These criteria can help you choose a reliable finishing company, reduce the likelihood of mistakes and additional costs, and ensure that your apartment is ready for occupancy according to your needs and budget.
Best Company for Finishing Your Apartment from the Plastering Stage
If you are looking for the best company to finish your apartment from the plastering stage, Regypt offers integrated property preparation services, starting with interior design and the selection of materials and furniture, through to supply, installation, and final preparation. The company offers four different packages to suit various customer needs and budgets: Basic, Medium, Premium, and Luxury. These packages are suitable for apartments intended for personal use, investment, or rental.
Regypt also provides the option of preparing 3D designs before implementation and coordinating finishing and furnishing work through a single service provider. This approach aims to save time and create a cohesive and functional living space.
You can visit Regypt's furnishing and finishing services page to explore the packages and request a consultation tailored to your apartment's size and budget.
Services Offered by the Best Company for Finishing Your Apartment from the Plastering Stage
Regypt provides a comprehensive range of apartment finishing and furnishing services, starting with property preparation and continuing until the unit is ready for occupancy or rental.
These services include:
1. Interior Design: Planning space layouts, furniture arrangements, colors, and
materials, with 3D previews before implementation.
2. Electrical Work: Installing electrical connections and distributing switches, power outlets, and lighting systems.
3. Plumbing and Waterproofing: Installing water supply and drainage systems and
carrying out waterproofing work in bathrooms and kitchens.
4. Plastering and Finishing Work: Carrying out plastering, suspended ceilings, gypsum board installations, flooring, painting, and wallpaper installation.
5. Carpentry and Doors: Preparing and installing doors, wooden features, and
aluminum work.
6. Kitchen and Bathroom Preparation: Installing kitchen units, sanitary fixtures, and the necessary fittings.
7. Furniture Supply and Furnishing: Selecting suitable furniture, supplying it, and
installing it in bedrooms, living rooms, and offices.
8. Lighting and Decoration: Coordinating lighting fixtures, curtains, carpets, and
accessories to complete the interior design.
9. Air Conditioning and Final Preparation: Preparing and installing air conditioning units and completing the final details before handover.
Regypt offers four finishing and furnishing packages: Basic, Medium, Premium, and Luxury. These packages accommodate different budgets and furnishing requirements, with the option to select the most suitable package based on the property's size and intended use.
Not sure which option fits your budget and needs? Contact us and the Regypt team will walk you through the shortlist.












